Buying guide
G Profile Handle Price in India — Cost per 10 Feet and What Decides It
Why quotes for the same-looking profile can differ so much, how to compare them fairly, and how to estimate the profile cost of a kitchen.
The short answer
Mirano does not publish a retail price for G profile handles; they are quoted per project by section, finish, length and quantity. Public marketplace listings for 10 ft or 3 m lengths range from roughly ₹500 to ₹2,000, and the spread comes from section weight, finish and what the unit price covers. Compare quotes by converting them to a price per metre.
Searches for "G profile handle price" usually end with a list of prices that cannot be compared. One listing is per piece, another per foot, another per 10 ft length, and the same photo can sit behind very different sections and finishes. A designer pricing a kitchen needs a method, not just a number.
This guide explains what moves the price of an aluminium edge handle, how to convert any quote to a common unit, and how to estimate the profile cost of a kitchen. It uses Mirano's published G profile handle information and a snapshot of public marketplace listings. It is not a price list.
Straight answer
What we can and cannot say about price
Mirano pricing. The product page states that pricing is quoted per project based on section, finish, length and quantity. There is no published retail price, so any figure on a third-party site is not a Mirano price.
Marketplace snapshot. On 25 October 2026 we reviewed public B2B marketplace listings for G and J profile handles. 10 ft and 3 m lengths were listed at roughly ₹500 to ₹2,000, mostly per piece, with a few per foot. Those listings come from different sellers with different sections, finishes and brands, and prices change, so treat the range as context for scale, not as a benchmark.
Cost drivers
What decides the price of a G profile handle
| Factor | How it affects price | What to ask |
|---|---|---|
| Section and wall thickness | A heavier section uses more aluminium and usually costs more | Which section, and is there a datasheet? |
| Finish and process | Anodised, coated and special colours are processed differently. Mirano notes anodised suits high-contact areas | Which finish, and what is the process? |
| Length basis | 3 m, 10 ft, per piece or per foot are different units | What length is one unit? |
| Caps, connectors and corners | Mitred corners need matching connectors; ends need caps | Are they included or extra? |
| Quantity and batch | Project quantities are quoted together and ordering a whole run reduces colour variation | Can the whole run ship in one batch? |
| Freight, cutting and taxes | Delivery, cut-to-size service and GST add to the landed cost | What is the landed cost to site? |
Mirano offers ten finishes: Silver, Champagne, Light Bronze, Dark Bronze, Black, Pietra Grey, Brass Gold, Armani Gold, Copper and Rose Gold Gloss. Finish availability and price are confirmed in the quote.
Unit conversion
How to compare quotes fairly
Convert every quote to a price per metre of profile before comparing. Divide the price by the length in metres: a 3 m length is 3 m, and a 10 ft length is 3.048 m. Per-foot prices multiply by 3.281 to give per metre.
Hypothetical example (not a Mirano or market price): a supplier quotes ₹900 for one 3 m length. That is ₹300 per metre, or about ₹91 per foot. A second supplier quotes ₹950 for a 10 ft length, which is about ₹312 per metre. They look different on paper and are close once converted.
| Quote basis | Convert to per metre | Check |
|---|---|---|
| Per 3 m length | Price ÷ 3 | Is it the same section and finish? |
| Per 10 ft length | Price ÷ 3.048 | Is 10 ft the true length? |
| Per foot | Price × 3.281 | Does it include caps? |
| Per piece | Price ÷ length of the piece in metres | What is the piece length? |
Worked method
Estimate the profile cost of a kitchen
- 1. Add up the front widths: List every shutter and drawer front that will carry a profile and add their widths.
- 2. Add cutting allowance: Allow for saw loss and a spare length. See the cutting example in our size guide.
- 3. Convert to full lengths: Divide the total by 3 m and round up. Grouping fronts can save a length.
- 4. Multiply by the quoted rate: Lengths × the rate per 3 m length from the quote, or metres × rate per metre.
- 5. Add caps and connectors: Count the ends and mitred corners and add them at the quoted price.
- 6. Add freight and taxes: Use the landed price at site, not the ex-works figure.
The widths and cut plan are explained in the G profile handle size guide.
Context
Cost versus other handle options
A profile replaces a handle on every front, so the profile cost scales with front width rather than with the number of doors. A gola profile is fixed in the carcass and needs precise machining, and push-to-open adds a mechanism to every door or drawer. The cost mix changes between systems rather than simply rising.
The comparison and the planning differences are in handleless kitchen options, and shape differences between sections are in G profile vs J profile handle. Gola options are on the gola profile page.
Next step
Getting an accurate quote from Mirano
- Send the front list: Share front widths, number of fronts and whether corners are mitred.
- State the board: Give the finished panel thickness and material.
- Name the section and finish: G-Section, Eureka J, T-Patti, Slim C or Slim J, and the finish from the ten available.
- Ask for the datasheet and a sample: Check groove width, depth and finish by hand.
- Share quantity and city: Quantity and delivery location change the landed price. Mirano says it responds within one business day.
Send these through the contact page, or use the quote button on the G profile handle page. Dealers and OEMs can use the dealer enquiry page.
Clear answers
Frequently asked questions
What is the price of a G profile handle in India?
Mirano quotes G profile handles per project by section, finish, length and quantity. Third-party marketplace listings for 10 ft or 3 m lengths ranged from roughly ₹500 to ₹2,000 on 25 October 2026, but sections and finishes differ.
What is the G profile handle price for 10 feet?
It depends on section, finish and seller. Convert any 10 ft quote to a price per metre by dividing by 3.048, then compare like for like.
Why do G profile prices vary so much?
Section weight, finish and process, whether caps and connectors are included, quantity and the unit of the quote all change the price. A per-piece price may refer to a different length than a per-foot price.
Does Mirano publish a G profile price list?
No. The product page says pricing is quoted per project. Request a quote with your front sizes, board thickness and finish.
Is a black or gold finish more expensive?
Finish is one of the factors that affects price. Mirano offers ten finishes and confirms the price for your chosen finish in the quote.
Are end caps and connectors included in the price?
Confirm it in the quote. Clean mitred corners need matching connectors and ends need caps, so add them to the estimate if they are extra.
How do I calculate the profile cost for a whole kitchen?
Add the front widths, allow for cutting loss, divide by 3 m and round up to full lengths, multiply by the rate, then add caps, connectors, freight and taxes.
Is a G profile cheaper than a gola profile?
It depends on the layout. The cost mix is different: a G profile is a profile per front, while gola needs a carcass-fixed channel and precise machining. Quote both on your actual layout.
Where can I get a G profile quote?
Use the contact page or the quote form on the G profile handle page. Mirano states that it responds within one business day.
Specify with confidence
Request a project quote for G profile handles
Send your front widths, board thickness and finish, and our team will respond with a quote and datasheet.