Buying guide
Aluminium Profile Shutter Price in India: Per Sq Ft Cost and What Decides It
Glass-door shutters are quoted per sq ft, per piece or per length of frame, depending on who is quoting. This guide shows what sits inside each number, a dated marketplace snapshot, and a method to compare quotes fairly.
The short answer
Mirano does not publish a fixed price list for aluminium profile shutters; profiles and shutter systems are quoted per project by section, finish, size and quantity. Seller listings seen in Google India results on 7 November 2026 showed finished glass shutters at about ₹600 to ₹850 per sq ft, and single frame lengths at about ₹150 to ₹1,500+ per piece. Those are third-party figures, not Mirano prices, and they are not like-for-like. Convert every quote to price per sq ft of finished shutter before comparing.
Searches for "aluminium profile shutter price" mix three different things: a loose frame sold by the length, a finished glass shutter sold by the sq ft, and a fitted kitchen or wardrobe door priced inside a full interior quote. The same number can mean very different things depending on which of the three is being quoted, which is why two quotes for the "same" shutter often cannot be compared directly.
This guide explains what sits inside each kind of quote, shows a dated snapshot of how the market lists prices, and gives a simple method to put every quote on one basis. Product details come from the aluminium profile shutters page; for glass and mirror choices, see the aluminium profile shutter guide for kitchens and wardrobes.
Straight answer
What we can and cannot say about price
Mirano pricing. The aluminium profile shutters page lists the profiles, glass thicknesses, maximum sizes and ten finishes, but it does not carry a price list. Mirano supplies these profiles to kitchen manufacturers, wardrobe makers, dealers and designers across India and quotes by project, so the price depends on the section, finish, length and quantity you specify.
Marketplace snapshot. On 7 November 2026 we reviewed Google India results for aluminium profile shutter price searches. The table shows what sellers list. These are third-party listings, not Mirano prices, and they are not verified quotes. Glass type, finish and hardware were mostly not stated, so use them only to see how the market quotes, not to budget a project.
| Listing type seen | Basis | Price shown | Usually not stated |
|---|---|---|---|
| Seller listing, shutter at 7 ft height | Per sq ft | ₹750 | Glass type, finish, hinges |
| Seller listings, glass-door shutters | Per sq ft | ₹600 and ₹850 | Frame section, glass thickness |
| Marketplace listing, kitchen profile shutter | Per piece | ₹550 | Door size, glass, finish |
| Trade directory listing | Per sq ft | ₹650 | Frame section, finish |
| Frame lengths of 6 ft to 10 ft | Per piece | About ₹150 to ₹1,500+ | Section, wall thickness, finish |
Listings priced per sq ft appear to describe a finished shutter, while per-piece listings often describe a frame length or a door of unstated size. That difference alone can create a large gap between two "prices".
Unit conversion
Per sq ft, per piece or per length: compare on one basis
Convert every quote to price per sq ft of finished shutter, with the glass, finish and hardware written down. Shutter sizes are given in millimetres, so convert first: sq ft = width (mm) × height (mm) ÷ 92,903. One square metre is 10.764 sq ft.
Hypothetical example (not a Mirano or market price): a 600 × 1200 mm door is 0.72 m², or 7.75 sq ft. At ₹700 per sq ft that door is ₹5,425, and six such doors (46.5 sq ft) come to ₹32,550.
| Quote basis | What it usually covers | How to compare |
|---|---|---|
| Per sq ft, finished shutter | Frame, glass and assembly; confirm what is included | Compare directly once glass, finish and hinges match |
| Per piece (one door) | One door of a stated size | Divide the price by the door area in sq ft |
| Per length (6 ft, 10 ft) | Frame section only | Add glass, corner parts, gasket, hinges and labour |
| Per kitchen or per project | Everything, often with installation | Ask for an itemised breakup by shutter size |
Cost drivers
What decides the price of an aluminium profile shutter
The same door size can sit at very different prices because the build changes. These are the factors to fix before comparing quotes.
| Factor | Why it changes the price | What to specify |
|---|---|---|
| Profile section | Different sections suit different door sizes: 20-20, 45 mm, 50 mm, Filo and Allinea are listed on the Mirano page | Section name and door size |
| Handleless or with handle | The with-handle version has an integrated handle; the handleless version has none | Handle style and finish |
| Finish | Mirano lists ten finishes on its main profiles; the finish you pick can change the price | Finish name or sample |
| Glass | Glass type (clear, tinted, frosted, reeded, mirror) and thickness can change the price: 4 mm with gasket or 5 mm without on 20-20 and 45 mm | Glass type, thickness, with or without gasket |
| Door size and weight | Larger doors need a stronger section and more hardware; each profile has a maximum recommended size | Width × height in mm, openable or lift-up |
| Hardware | Slim hinges for 20-20 and soft-close hinges for 45 mm are specified on the page; lift-up systems are specified separately | Hinge type and angle, lift-up if any |
| Quantity and project type | Dealer, OEM and single-kitchen orders can be quoted differently | Quantity, city and project type |
A very low per-piece or per-length price needs a check: ask for the section dimensions and wall thickness in the quote, and confirm what is excluded.
Size limits
Maximum recommended sizes by profile
Price follows size, and size is limited by the section. The figures below are the maximum recommended sizes from the Mirano catalogue as shown on the shutters page. Confirm them against your door before you ask for a price.
| Profile | Glass | Maximum recommended size | Typical use |
|---|---|---|---|
| 20-20 Insert Profile (20 × 20 mm) | 4 mm with gasket, 5 mm without | 600 × 1200 mm | Openable kitchen and lift-up shutters; slim hinge |
| 20-20 Paste-On Profile | 4 mm or 5 mm; glass fixed on the surface of the frame | 600 × 2400 mm | Slim frame shutters; slim hinge |
| 45 mm profile, handleless and with handle | 4 mm with gasket, 5 mm without | 600 × 3000 mm | Openable wardrobe shutters; soft-close hinge (95°, 110°, 155° listed) |
| Allinea frame profile | See catalogue | 600 × 2700 mm | 270° system; confirm with Mirano |
| 50 mm profile, handleless and with handle | Not published; confirm when quoting | Not published; confirm when quoting | Wide frame for larger shutters |
Estimating
How to estimate a kitchen or wardrobe shutter budget
Use this method to turn any seller figure into a comparable number. It needs only the shutter sizes.
| Step | What to do | Example (600 × 1200 mm door) |
|---|---|---|
| 1. Area per door | Width × height in mm ÷ 92,903 | 720,000 ÷ 92,903 = 7.75 sq ft |
| 2. Total area | Area per door × number of doors | 7.75 × 6 doors = 46.5 sq ft |
| 3. Basis check | Confirm the quote is per sq ft of finished shutter with glass and finish named | Rewrite per-piece quotes as price ÷ 7.75 |
| 4. Add what is excluded | Hinges, lift-up systems, handles, installation, freight | Ask for each as a separate line |
| 5. Compare two quotes | Put both on the same sq ft, same glass, same finish | A difference now reflects the build, not the unit |
For a wider cost view of a full kitchen or wardrobe, the hardware budget guide shows where shutters sit among the other fittings.
Getting a quote
What to send for an accurate aluminium profile shutter quote
Mirano quotes by project. The more of the table below you send, the fewer follow-up questions it takes to reach a number. Use the contact page for a project quote, or the dealer and OEM enquiry page for trade supply.
| Detail | Why it matters |
|---|---|
| Kitchen, wardrobe or other use | Decides the section, hinge and maximum size |
| Door sizes (W × H in mm) and quantity | Sets the total sq ft and the section |
| Handleless or with handle | Changes the profile and the finish options |
| Finish | Ten finishes are listed; pick one or ask for samples |
| Glass type and thickness, and who supplies it | Decides whether glass is part of the price |
| Delivery city and project type | Affects freight and dealer or OEM pricing |
Related reading: the G profile handle price guide uses the same per-unit method for handle profiles.
Clear answers
Frequently asked questions
What is the price of an aluminium profile shutter in India?
It depends on the profile section, glass, finish, size and quantity. Mirano quotes by project and does not publish a price list. Seller listings seen on 7 November 2026 showed finished glass shutters at about ₹600 to ₹850 per sq ft; treat these as third-party figures, not Mirano prices.
What is the aluminium profile shutter price per sq ft?
Third-party listings we saw on 7 November 2026 ranged from about ₹600 to ₹850 per sq ft, mostly without stating glass, finish or hinges. Ask every supplier to state what the per sq ft price includes before comparing.
What is the price of a kitchen profile shutter per piece?
One marketplace listing showed ₹550 per piece without stating the size. A per-piece price means little without the door size: divide it by the door area in sq ft to compare it with per sq ft quotes.
How do I convert shutter size from mm to sq ft?
Multiply width by height in millimetres and divide by 92,903. A 600 × 1200 mm door is 720,000 mm², which is about 7.75 sq ft.
Does the shutter price include glass?
Not always. Some quotes cover only the frame, some include glass and assembly. The Mirano page lists glass as 4 mm with gasket or 5 mm without for the 20-20 and 45 mm profiles; confirm who supplies the glass and whether it is in the price.
What decides the price of an aluminium profile shutter?
The profile section, handleless or with-handle style, finish, glass type and thickness, door size, hinges or lift-up hardware, and the quantity and delivery city.
Is the price different for kitchen and wardrobe shutters?
Usually, because the sections differ. The 20-20 Insert profile is listed up to 600 × 1200 mm for openable kitchen and lift-up shutters, while the 45 mm profile is listed up to 600 × 3000 mm for openable wardrobe shutters.
What is the largest shutter I can make?
It depends on the profile. From the Mirano catalogue: 20-20 Insert up to 600 × 1200 mm, 20-20 Paste-On up to 600 × 2400 mm, Allinea up to 600 × 2700 mm and the 45 mm profile up to 600 × 3000 mm. Confirm before ordering.
Does Mirano sell finished shutters or only profiles?
Mirano supplies aluminium profile shutter systems to kitchen manufacturers, wardrobe makers, dealers and designers across India. The exact supply format, such as frame lengths, cut-to-size frames or assembled shutters, should be confirmed with the Mirano team when you enquire.
How do I get a Mirano quote for aluminium profile shutters?
Send the use (kitchen or wardrobe), door sizes and quantity, handle style, finish, glass preference and delivery city through the contact page. Dealers and OEM buyers can use the dealer enquiry page.
Continue your research
Related ranges and resources
Specify with confidence
Request a project quote for aluminium profile shutters
Send your door sizes, quantity, handle style, finish, glass preference and delivery city. Mirano quotes by project and supplies manufacturers, dealers and designers across India.